Laser Hair Removal

Splendor X with BLEND X · Diode · IPL

Alexandrite & Nd:YAG Laser Hair Removal (Splendor X)

Alexandrite & Nd:YAG Laser Hair Removal using Splendor X with BLEND X™ technology is an advanced, non-invasive treatment designed to safely and effectively reduce unwanted hair across a wide range of skin tones. This system uniquely combines two laser wavelengths — Alexandrite (755 nm) and Nd:YAG (1064 nm) — in customizable proportions to match individual skin and hair characteristics.

Alexandrite laser energy is highly effective for lighter skin tones with dark hair, offering fast and efficient hair reduction, while Nd:YAG penetrates deeper into the skin and is safer for darker skin tones. BLEND X™ technology allows both wavelengths to be delivered simultaneously in precise ratios, optimizing effectiveness while maintaining a high level of skin safety. As with all laser treatments, multiple sessions are required to target hair during its active growth phase.

With a personalized treatment approach, Splendor X delivers long-lasting hair reduction, smoother skin, and consistent results across different skin types. Treatments are comfortable, fast, and require minimal downtime. This technology is suitable for both light and dark skin tones, as well as a variety of hair textures; however, very light, blonde, red, or grey hair may respond less effectively due to low pigment levels. A professional consultation is essential to determine the optimal laser blend for each client.

What you will notice

Effective for a wide range of skin tones
Customizable treatment using dual wavelengths
Long-lasting hair reduction
Fast and comfortable sessions

What the procedure looks like

The treatment area is cleansed and assessed
Protective eyewear is provided
Laser settings and wavelength blend are customized
Laser pulses are delivered to the treatment area
A mild warming sensation may be felt
Treatment duration depends on the size of the area

You will benefit best if you experience

Unwanted hair on light or dark skin tones
Previous limited results with other laser systems
Desire for advanced, customizable laser technology
Long-term hair reduction with enhanced safety

IPL Laser Hair Removal

IPL Laser Hair Removal (Intense Pulsed Light) is a non-invasive treatment that uses broad-spectrum light to reduce unwanted hair by targeting the pigment within the hair follicle. Unlike traditional lasers that emit a single wavelength, IPL delivers multiple wavelengths of light, allowing it to treat larger areas efficiently and comfortably.

The light energy is absorbed by the melanin in the hair shaft and converted into heat, which damages the hair follicle and slows down future hair growth. Over time, treated hair becomes finer, lighter, and grows back more slowly. IPL works best on actively growing hair, which is why a series of treatments is required for optimal results.

With repeated sessions, hair growth is significantly reduced, leaving the skin smoother and more even. IPL hair removal is quick, gentle, and requires little to no downtime. Because IPL technology targets pigment, this treatment is most effective on lighter skin tones with darker hair, and a professional consultation is necessary to determine suitability, especially for darker skin tones.

What you will notice

Long-term reduction of unwanted hair
Smoother skin texture
Less irritation compared to shaving or waxing
Suitable for large treatment areas

What the procedure looks like

The treatment area is cleansed and prepared
Protective eyewear is provided
A cooling gel may be applied to the skin
Light pulses are delivered to the targeted area
A warm snapping sensation may be felt
Treatment time varies depending on the area

You will benefit best if you experience

Unwanted body or facial hair
Frequent shaving or waxing irritation
Ingrown hairs
Desire for long-term hair reduction

Diode Laser Hair Removal

Diode Laser Hair Removal is an advanced, non-invasive treatment designed to reduce unwanted hair by delivering a concentrated beam of laser energy directly into the hair follicle. Unlike IPL, diode laser technology uses a single, precise wavelength, allowing for deeper penetration and more targeted treatment of the follicle.

The laser energy is absorbed by melanin in the hair shaft and converted into heat, which damages the hair follicle and inhibits future growth. This technology is especially effective for darker, coarser hair, as higher melanin levels allow the laser to work more efficiently. Multiple sessions are required because the laser is most effective during the active growth phase of the hair.

With consistent treatments, hair growth is significantly reduced, resulting in smoother skin and longer-lasting results. Diode laser hair removal is safe, fast, and suitable for many skin types when performed correctly. However, because the laser relies on pigment within the hair, it is not an ideal option for very light, blonde, red, or grey hair, where melanin levels are insufficient for effective treatment. A professional consultation is recommended to determine the best hair removal method for each individual.

What you will notice

Effective reduction of dark, coarse hair
Long-lasting results with fewer sessions
Less irritation compared to shaving or waxing
Suitable for precise and large treatment areas

What the procedure looks like

The treatment area is cleansed and prepared
Protective eyewear is provided
Laser settings are adjusted based on skin and hair type
Laser pulses are applied to the targeted area
A warm or tingling sensation may be felt
Treatment time depends on the size of the area

You will benefit best if you experience

Dark or coarse unwanted hair
Frequent shaving or waxing
Ingrown hairs
Desire for long-term hair reduction

Pricelist

Swipe to scroll →

Face

Full faceCA$100.00

Includes upper lips, chin, cheeks, sideburns, forehead or neck

CheeksCA$50.00

NeckCA$50.00

Upper lipCA$50.00

ChinCA$50.00

SideburnsCA$50.00

Upper lip + chinCA$75.00

EarsCA$50.00

Underarms & Arms

UnderarmsCA$60.00

ArmsCA$130.00

Half armsCA$80.00

Chest, Stomach & Back

ChestCA$100.00

StomachCA$100.00

Chest + stomachCA$169.00

Full backCA$169.00

Half backCA$100.00

Bikini & Intimate Areas

AreolasCA$50.00

BrazilianCA$160.00

Bikini lineCA$100.00

LabiaCA$100.00

Pubic areaCA$100.00

Buttock cheeksCA$60.00

Belly lineCA$40.00

Legs

Full legsCA$190.00

Lower legsCA$110.00

Upper legsCA$110.00

Packages

Bikini + underarmsCA$160.00CA$129.00

Brazilian + underarmsCA$200.00CA$189.00

Lower legs + underarms + BrazilianCA$310.00CA$259.00

Full legs + underarms + BrazilianCA$390.00CA$329.00

Full legs + BrazilianCA$330.00CA$280.00

Full legs + underarmsCA$250.00CA$216.00

Lower legs + BrazilianCA$250.00CA$221.00

Full body (5 areas)CA$350.00

Full body (6 areas)CA$419.00

Full body (7 areas)CA$489.00

Book full body and save 30%CA$0.00

Save 30%

Packages (6 sessions)

Underarms packageCA$360.00CA$300.00

Full face packageCA$600.00CA$500.00

Full legs packageCA$1,140.00CA$950.00

Brazilian packageCA$840.00CA$700.00

Price for one session

Important Note!

Cancellation Policy

24-hour notice is required for all cancellations to aviod a late cancellation or no-show fee.

We provide clients with a 10-minute grace period, however if you are later than 10 minutes your appointment may need to be rescheduled and you will be required to pay a late cancellation fee.

Late Cancellation Fee: 50% of service booked.
Less than 24-hour Cancellation Fee: 50% of service booked.
No-show Fee: 100% of service booked.

Please contact the salon if you have any questions.

Frequently Asked Questions

The number of treatments varies depending on the area being treated, your hair type, and individual hair growth cycles. Most clients need between 8 and 12 sessions for the best results, spaced about 4 to 6 weeks apart. Some areas or hair types may require occasional maintenance treatments.
Not to mention, laser treatments are most effective on dark hair, so we cannot guarantee satisfying results for gray or blonde hair.
After completing the full course, we usually recommend one maintenance (touch-up) session per year to keep your skin smooth and prevent new hair growth.

1. Shave the area one day prior to treatment.
To ensure the most effective and efficient session, please shave the treatment area using your preferred method and shaving products the day before your appointment. This helps prevent irritation and allows the laser to target the hair follicles directly, not surface hair. Arriving already shaved also helps us make the most of your appointment time, so we can focus entirely on the procedure itself.
2. Remove make up before the procedure
If you’ve booked a facial laser hair removal session, please arrive without any makeup on. This ensures your skin is clean and ready for treatment. It's best to remove cosmetics at home using your own skincare products that are compatible with your skin type, helping to avoid any irritation.
3. Avoid Sun Exposure
Do not tan or expose your skin to direct sunlight for at least 2 weeks before the treatment. Use SPF 30+ daily.
4. No waxing, threading, tweezing or use of any chemical depilatories or bleach the area before and while undergoing the laser hair removal sessions.
5. Avoid Using Active Skincare Products and Perfumes
Discontinue retinoids, glycolic acid, salicylic acid, and other exfoliating or irritating products 3–5 days before treatment. Also we recommend not to use any perfume, lotion or cologne on the treatment area prior to procedure.

1. No Sun Exposure
Avoid direct sunlight and tanning beds for 1-2 days. Always wear SPF 30+ when going outside.
2. No Hot Showers, Saunas, or Intense Workouts
Refrain from heat, steam, or sweating for 24–48 hours after treatment.
3. No Harsh Skincare Products
Avoid retinoids, acids (like AHA/BHA), exfoliants, or scrubs for 5–7 days. Also, avoid using deodorants, perfumes, perfumed lotion, cologne or any cream that may irritate the treatment area for 1–2 days.
4. Do Not Pick or Scratch the Skin
If dark spots or flaking occur, let them naturally shed. Do not peel or touch.

For best results, we recommend a course of 5–8 sessions depending on individual skin concerns. Treatments are performed every 7–10 days, which allows the skin to gradually renew and improve.
After completing the full course, we usually recommend one maintenance (touch-up) session per year to keep your skin smooth and prevent new hair growth.

1. Avoid Sun Exposure
Do not tan or expose your skin to direct sunlight for at least 2 weeks before the treatment. Use SPF 30+ daily.
2. Stop Using Active Skincare Products
Discontinue retinoids, glycolic acid, salicylic acid, and other exfoliating or irritating products 3–5 days before treatment.
3. Do Not Wax or Use Depilatory Creams
Avoid waxing, tweezing, or using hair removal creams on the treatment area for 1–2 weeks prior.
4. Avoid Certain Medications
Refrain from using photosensitizing medications such as antibiotics (e.g., tetracyclines) — consult your doctor first.
5. Come with Clean Skin
On the day of your appointment, arrive with clean, makeup-free, lotion-free, and product-free skin.

1. No Sun Exposure
Avoid direct sunlight and tanning beds for at least 2 weeks. Always wear SPF 30+ when going outside.
2. No Hot Showers, Saunas, or Intense Workouts
Refrain from heat, steam, or sweating for 24–48 hours after treatment.
3. No Harsh Skincare Products
Avoid retinoids, acids (like AHA/BHA), exfoliants, or scrubs for 5–7 days.
4. Do Not Pick or Scratch the Skin
If dark spots or flaking occur, let them naturally shed. Do not peel or touch.
5. No Makeup (Initially)
Avoid makeup on the treated area for at least 24 hours, or until any redness or sensitivity subsides.

1. Use Gentle Skincare
Cleanse with a mild cleanser and keep the skin hydrated using a soothing, fragrance-free moisturizer.
2. Apply SPF Daily
Protect your skin with broad-spectrum sunscreen (SPF 30 or higher) every day, even indoors.
3. Stay Cool
Apply cool compresses if needed to reduce redness or warmth in the skin.
4. Be Patient with Results
Pigmentation or spots may darken before flaking off — this is normal. Full results may take several sessions.
5. Follow Professional Instructions
Adhere to all aftercare advice given by your technician for best results and safety.

1. Avoid Sun Exposure
Do not tan or expose your skin to direct sunlight for at least 2 weeks before the treatment. Use SPF 30+ daily.
2. Stop Using Active Skincare Products
Discontinue retinoids, glycolic acid, salicylic acid, and other exfoliating or irritating products 3–5 days before treatment.
3. Do Not Wax or Use Depilatory Creams
Avoid waxing, tweezing, or using hair removal creams on the treatment area for 1–2 weeks prior.
4. Avoid Certain Medications
Refrain from using photosensitizing medications such as antibiotics (e.g., tetracyclines) — consult your doctor first.
5. Come with Clean Skin
On the day of your appointment, arrive with clean, makeup-free, lotion-free, and product-free skin.

1. No Sun Exposure
Avoid direct sunlight and tanning beds for at least 2 weeks. Always wear SPF 30+ when going outside.
2. No Hot Showers, Saunas, or Intense Workouts
Refrain from heat, steam, or sweating for 24–48 hours after treatment.
3. No Harsh Skincare Products
Avoid retinoids, acids (like AHA/BHA), exfoliants, or scrubs for 5–7 days.
4. Do Not Pick or Scratch the Skin
If dark spots or flaking occur, let them naturally shed. Do not peel or touch.
5. No Makeup (Initially)
Avoid makeup on the treated area for at least 24 hours, or until any redness or sensitivity subsides.

1. Use Gentle Skincare
Cleanse with a mild cleanser and keep the skin hydrated using a soothing, fragrance-free moisturizer.
2. Apply SPF Daily
Protect your skin with broad-spectrum sunscreen (SPF 30 or higher) every day, even indoors.
3. Stay Cool
Apply cool compresses if needed to reduce redness or warmth in the skin.
4. Be Patient with Results
Pigmentation or spots may darken before flaking off — this is normal. Full results may take several sessions.
5. Follow Professional Instructions
Adhere to all aftercare advice given by your technician for best results and safety.

1. Let Hair Grow
Ensure hair is at least 1/4 inch (about 6 mm) long for effective waxing — usually about 2–3 weeks of growth.
2. Gently Exfoliate the Area
Exfoliate 24–48 hours before your appointment to remove dead skin and help prevent ingrown hairs.
3. Avoid Moisturizers or Oils
Do not apply lotion, oils, or creams on the day of your waxing session, as they can interfere with wax adhesion.
4. Avoid Sun Exposure & Tanning
Stay out of the sun and tanning beds for at least 24 hours before your wax to prevent extra sensitivity.
5. Take a Mild Pain Reliever (Optional)
You may take an over-the-counter pain reliever 30–60 minutes before your appointment if you’re sensitive to pain.

1. No Sun or Tanning
Avoid direct sun exposure, tanning beds, or hot weather for 24–48 hours.
2. No Heat or Friction
Skip hot baths, saunas, steam rooms, and intense workouts for at least 24 hours.
3. No Tight Clothing
Avoid tight jeans, leggings, or underwear that may rub against the freshly waxed area.
4. No Touching or Scratching
Keep hands off the treated area to prevent irritation or infection.
5. No Perfumed or Harsh Products
Avoid deodorants (for underarm waxing), body sprays, lotions with alcohol, or exfoliants for 24–48 hours.

1. Use Soothing Products
Apply aloe vera gel or a calamine lotion to reduce redness and soothe the skin.
2. Exfoliate Gently (After 48–72 Hours)
Start gentle exfoliation a few days post-wax to prevent ingrown hairs.
3. Keep the Area Clean & Dry
Especially for bikini or underarm areas, maintain hygiene to prevent irritation.

1. Let Hair Grow
Hair should be at least 1/8 to 1/4 inch long (about 3–6 mm) — usually 10–14 days of growth.
2. Gently Exfoliate
Exfoliate the area 24–48 hours before your appointment to help remove dead skin and reduce the chance of ingrown hairs.
3. Avoid Creams, Oils, or Lotions
Do not apply anything on the skin (no moisturizers, oils, or deodorants) on the day of your appointment.
4. Avoid Sun Exposure or Tanning
Stay out of direct sunlight and tanning beds for 24–48 hours before sugaring to prevent irritation.
5. Limit Caffeine or Alcohol
Avoid coffee or alcohol right before your appointment, as they can increase skin sensitivity.

1. No Heat or Sweat
Avoid hot showers, baths, saunas, steam rooms, and heavy workouts for at least 24 hours.
2. No Sun or Tanning
Avoid direct sun exposure and tanning beds for 48 hours after sugaring.
3. No Tight Clothing
Wear loose clothing to allow the skin to breathe and avoid friction.
4. No Scratching or Touching
Do not touch or scratch the treated area — it can cause irritation or infection.
5. No Scented Products or Exfoliation (Yet)
Avoid perfumes, deodorants (for underarms), and exfoliating products for 24–48 hours after the procedure.

1. Apply Soothing Products
Use aloe vera or a gentle, fragrance-free moisturizer or calamine lotion to calm the skin.
2. Start Gentle Exfoliation After 48–72 Hours
Begin exfoliating 2–3 times per week to prevent ingrown hairs and maintain smooth skin.
3. Keep Skin Clean & Dry
Especially for bikini or underarm areas — maintain hygiene and avoid tight or sweaty environments.